Wood is in Our Blood , Wood is Our World
Wood is in Our Blood , Wood is Our World
Single and Double Auto Mould models are available. Work table can be tilted for angular moulding and V-notch table helps for moulding on square work piece.
Moulding Facility for straight and angular moulding
Two working sides Moulding can be done on both the sides, which results double output
Double Auto Mould |
||
| Model | J-507 |
|
Main Side |
2nd Side |
|
mm / inch |
mm / inch |
|
| Work Table Size | 455 x 150 / 18" x 6" |
455 x 150 / 18" x 6" |
| Up / Down movement of table | 100 / 4" |
63 / 2 ½" |
| Longitudinal movement of table | 50 / 2" |
25 / 1" |
| Table Tilt - Degree | 15 |
- |
| Feeding Speed (Feet per minute) | 24 |
24 |
| Moulding Block Speed (RPM) | 4000 |
4000 |
| Max. Moulding Block width | 114 / 4 ½" |
75 / 3" |
| Moulding block diameter | 95 / 3¾" |
95 / 3¾" |
| Power required - HP / RPM | 3 / 1440 |
- |
| Approx. wt. of machine - kg. | 300 |
|
Moulding block 2 no. each of 1.5" & 3" length, motor pulley, motor fixing plate, washers set, moulding v-block & toolkit
