The whole world of Panel Processing machines
The whole world of Panel Processing machines
The glue in the glue pot, glue leveler, wiper, the extrusion screw and the heating element all make a bonding system, which gives an effective & efficient banding to the work piece.
Specially design height adjusting steel roller give perfection to edge band for proper fixing with work piece.
The pneumatic cutting device can be set to actuate the pneumatic cutter to cut the band for a pre-defined length using an electronic counter.
45° edge tape grooving for 45° inclined panel.
A specially designed hylum surface working table can be tilted from 0° to 45°
Inclined 45° Edge Banding
A user friendly electro-pneumatic control panel which monitors & controls the operation
| Model No | Unit |
J-3045.in |
|||||||||
| Table size (L x B) | mm |
1150 x 900 |
|||||||||
| Minimum work piece length | mm |
280 |
|||||||||
| work piece thickness range | |||||||||||
| - Inclined 45° Edge | mm |
10 - 25 |
|||||||||
| - Full Straight Edge | mm |
10 - 50 |
|||||||||
| Edge Banding Thickness for PVC & ABS in coil form | mm |
0.4 - 2.0 |
|||||||||
| Min-Radius for curved Edging | mm |
20 |
|||||||||
| Glue pot capacity | kg |
3 |
|||||||||
| Feed speed | m/min |
4 to 12 |
|||||||||
| Front table adjustment (Up & Down) | mm |
3 |
|||||||||
| Front table tilt angle | degree |
0° to 45° |
|||||||||
| Maximum setting temperature | °C |
180° |
|||||||||
| Compressed air requirement | hp/kg/cm2 |
0.5 / 5 - 7 |
|||||||||
| Heating element | kw |
1.5 |
|||||||||
| 45° Tape groove motor | kw |
0.73 |
|||||||||
| Electric motor | kw |
0.37 (415V, 3ø) |
|||||||||
| Power supply | voltage / ø |
415V , 3ø |
|||||||||
| Total Power | hp |
3.5 |
|||||||||
| Machine dimension (L x B x H) | mm |
2150 x 1100 x 1080 |
|||||||||
| Approx. net weight | kg |
330 |
|||||||||
